IDEAL Security SKGLWBLUS Installation Guide download pdf

RFQSWGL

DRILLING TEMPLATE

FOR OUTSWINGING DOORS

ONLY

1. With door in closed position, at a

height to miss main door knob,

place back side of this leaf on the

inside of door, and

pencil mark the holes.

2. Make sure the template is straight

as this will affect the appearance

and performance of the handle and

deadbolt on the door.

3. Use a center punch and gently tap

the three holes on the inside of the

door only.

4. Using ONLY a 1/4” drill bit, drill 3

holes straight through the door. The

center hole may be enlarged to a

maximum of 5/16” to ensure that

the spindle operates freely.

5. Align lever handle as shown and insert

spindle to engage spring.

6. Place handle into holes onto outside

of door. Guide spindle into the center

hole of the handle from the inside of

the door while still holding outside

handle in place. Fasten inside handle

to outside lever using 2 machine

screws provided.

7. Attach latch strike (shim if necessary

with thin plastic shims) with two #6

screws to wooden door jamb so

strike firmly engages latch

RFQSWGLDRILLING TEMPLATEFOR OUTSWINGING DOORSONLY1. With door in closed position, at a height to miss main door knob, place back side of this l

No comments

IDEAL Security SKGLWBLUS Installation Guide